120 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ disclaimer: us.tdk-lambda.com/lp/legal.htm rfe1600 series features u 1u high u internal oring fets & current share u high ef? ciency u i 2 c, pmbus communication option 1600w 1u front end power supplies model rfe1600 input voltage range vac 85 - 265vac, 47 - 63hz. see model selector for power derating(2) input current (max) 100/230vac a 14.2 / 8.1a inrush current a <35a power factor correction - meets en61000-3-2, pf > 0.98 at full load temperature coef? cient %/c <0.02%/c overcurrent protection % 105 - 115% (programmable) overvoltage protection % 110% (tracking). cycle ac to reset or utilize remote on/off(1) overtemperature protection - shutdown with automatic reset. warning signal provided(1) hold up time ms >10ms, 100/230vac input, 80% loading leakage current ma < 0.75 / 1.5ma, 100 / 230vac, 60hz remote sense compensation - rfe1600-12: 0.25v/wire, rfe1600-24: 0.5v/wire, rfe1600-48: 1.0v/wire indicators - ac ok: green led, dc ok / fail: green / red led remote on/off - yes, inhibit & enable parallel operation - yes, single wire current share, 5% accuracy of max current, up to 10 units ac fail signal - open collector, on when ac is within 85 - 270vac dc good signal - open collector, on when output is above 85 to 95% of setpoint (tracking) remote adjust - by either external 0 - 5v signal or 1k potentiometer(1) i 2 c interface - isolated from output, add suf? x /s, pmbus compatible(1) auxiliary output - 11.2 - 12.5v, 0.5a, 240mv ripple and noise operating temperature c -10 to +70c, derate 2%/c from 50 to 60c, 2.5%/c from 60 to 70c storage temperature c -30 to +85c humidity (non condensing) %rh operating: 10 - 90%rh, storage: 10 - 95%rh cooling - two variable speed internal fans, air? ow exits across input/output connector withstand voltage - input to output 3kvac, input to output 2kvac, output to ground: rfe1600-12, -24v 500vac, rfe1600-48 1.5kvac isolation resistance m? >100m? at 25c & 70%rh, output to ground 500vdc vibration (basic transportation) - mil-810f, method 514.5 shock (basic transportation) g 30g safety agency certi? cations - ul60950-1, en60950-1 (2nd edition), ce mark conducted and radiated emi - en55022 & fcc part 15; conducted class b, radiated class a immunity - iec61000-4-2 (lv 2,3), -3 (lv 2), -4 (lv2), -5 (lv3,4), -6 (lv2), -8 (lv 4), -11 size (w x h x d) in power supply: 3.35 x 1.61 x 12.6 weight g 1550 warranty yrs three speci? cations key market segments & applications notes (1) see installation manual for detailed speci? cations & test methods (2). derate linearly 1%/v from 100vac to 85vac input
121 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ revision a5: april 2013 rfe1600 series for additional information, please visit us.tdk-lambda.com/lp/products/rfe-series.htm outline drawing pin no. function 1 -sense 2 +sense 3 voltage programming 4 current programming 5 voltage reference 6 temp. alarm 7 dc o.k 8 enable 9 signal return 10 -local sense 11 +local sense 12 trimmer 13 +5v 14 -sense 15 ac fail 16 current share 17 signal return 18 aux_out (+12v) pin no. function 1 a0 (pmbus) 2 a1 (pmbus) 3 a2 (pmbus) 4 -sense 5 smb alert (pmbus) 6 sda (pmbus) 7 scl (pmbus) 8 signal_rtn notes: 1. mounting screws must not protrude into the power supply more than 6.0 mm, 2. led indicators. refer to instruction manual 3. allow minimum 50mm of unrestricted air space at the rear of the unit. do not obstruct air flow to the unit front panel. 4. receptacle samtec p/n ipd1-09-d-k contact pin samtec cc79l-2024-01-l provided as accessory in the package hand tool: cat-ht-179-2024-11 wire awg 20-24 5. receptacles samtec p/n ipd1-04-d-k contact pin samtec cc79l-2024-01-l provided as accessory in the package for ?/s? option hand tool: cat-ht-179-2024-11 wire awg 20-24 6. model name, input and output rating and safety approvals symbols are described on top surface of label 7. rear panel connectors and bus bar polarity description 356.61.0 85.00.5 30.61.0 bus bar (+) 10.0typ detail b scale 2:1 j1 (see note 4) 18 9 1 4 1 10 8 5 dc ok led(see note 2) detail a scale 1:1 14.5typ x 2 m3x8 sems screw for sense connection in each bus bar 7.0typ j2 (see note 5) 9.3 9.00.5 bus bar (-) b 42.2 gndn l 21.4 36.50.5 28.80.5 70.00.5 6.5 13.0typ 16.01.0 see note 7 see note 6 air flow direction 9.0 a a a 320.01.0252.00.5 264.70.5 43.00.5 40.50.3 mounting holes m4 marked ?a? 2 holes on each side (see note 1) mounting holes m3 3 places marked ?b? (see note 1) b b b j1 j2 vout trim m6 or 1/4? screws for load wires connection for each bus bar + 2.5 22.80.5 14.3 6.5typ 2.5typ x 2 40.80.5 20.4 typ 36.00.5 fps1000 1u 1000w (3 per rack) hws1500 1500w limited lifetime warranty hfe1600 1u 1600w (5 per rack) HFE2500 1u 2500w (4 per rack) other related products notes: (3) at 75% load, 100 / 230vac input output adjust. max current max power max current(2) max power(2) model voltage range(1) (vin>170vac) (vin>170vac) (100 |
